When I go to Bluetooth Settings on the tablet, I am not able to see any Bluetooth devices even after scanning.

• Related Articles

• Can I take the tablet from one truck and use it in another truck?

  - You can swap tablets into a different truck.  - In order to do this, you must go into Bluetooth Settings in the tablet once you are in the truck you will be driving.  - In Delivery Droid > Bluetooth Settings you must pair with the Printer and the ...

• While pumping fuel, I was able to finish the delivery, but when I went to the tablet, it still shows the delivery flow active and seems to be stuck.

  - Perform a manual delivery to finish the action on the tablet.  - If the problem persists, troubleshoot connectivity to the Parani Bluetooth Antenna (above)   

• When I set a preset on the tablet, the meter does not stop and pumps more fuel to the customer than intended.

  - Presets need to be confirmed at the meter prior to pumping in order to ensure proper amount of fuel is delivered.  - Before you pump, follow the recommended manufacturer procedures for setting a preset (based on which register you are using, LCR, ...

• I am having general issues with the Delivery Droid application. Some of my settings seem off and things are not working correctly.

  Verify the latest update to delivery droid pro is installed by going to the menu options in the app and selecting about to see the version installed and then select check for update (store) button to ensure the latest version is installed. If the ...

• The meter does not seem to be communicating with the tablet. No totalizer reading and will not connect in Delivery Screen.

  - Start by turning ignition off and on.  Then try again.  - Check to make sure that the Parani Bluetooth antenna is flashing three times in a row.  If not the issue is with the Bluetooth antenna.  - Check all connections starting from the lappad ...