The meter does not seem to be communicating with the tablet. No totalizer reading and will not connect in Delivery Screen.
- Check to make sure that the Parani Bluetooth antenna is flashing three times in a row. If not the issue is with the Bluetooth antenna.
- Check all connections starting from the lappad adapter to ensure that the Bluetooth antenna is connected securely to the top of the adapter.
Related Articles
Can I take the tablet from one truck and use it in another truck?
- You can swap tablets into a different truck. - In order to do this, you must go into Bluetooth Settings in the tablet once you are in the truck you will be driving. - In Delivery Droid > Bluetooth Settings you must pair with the Printer and the ...
While pumping fuel, I was able to finish the delivery, but when I went to the tablet, it still shows the delivery flow active and seems to be stuck.
- Perform a manual delivery to finish the action on the tablet. - If the problem persists, troubleshoot connectivity to the Parani Bluetooth Antenna (above)
I am having general issues with the Delivery Droid application. Some of my settings seem off and things are not working correctly.
Verify the latest update to delivery droid pro is installed by going to the menu options in the app and selecting about to see the version installed and then select check for update (store) button to ensure the latest version is installed. If the ...
When I go to the meter and tap on Start or place the meter in the run position, the numbers do not reset and fuel is not flowing from the meter.
- First thing to check is can the meter print to the printer. If the meter cannot print, it will not pump fuel. - Check printing directly from the meter by printing a diagnostic page. - If meter is printing fine, try to setup your delivery and ...
When I set a preset on the tablet, the meter does not stop and pumps more fuel to the customer than intended.
- Presets need to be confirmed at the meter prior to pumping in order to ensure proper amount of fuel is delivered. - Before you pump, follow the recommended manufacturer procedures for setting a preset (based on which register you are using, LCR, ...